|
Post by mirkosoft on Nov 4, 2018 22:07:28 GMT
Thank you for useful info. I try ROM mods.
Other way - I need not control 64 mode, of add any function. I'm not interest in 64 mode, even not fan of C64. Simple really direct Q: is possible to create so fatal crash that computer reboots automatically like at computer power-on? Except RAM data loss, if possible... I know reset button and its assigned keys, I want to do it by software.
But very useful infomation at all.
Miro
|
|
|
Post by bjonte on Nov 5, 2018 11:49:58 GMT
Simple really direct Q: is possible to create so fatal crash that computer reboots automatically like at computer power-on? Except RAM data loss, if possible... It isn’t possible. The hardware is hardwired to disable the MMU registers when the C64 ROM is enabled. The MMU is required to enable the C128 ROM again so there is no way to get back. A hardware reset is required.
|
|
|
Post by jmpff3d on Nov 7, 2018 8:28:21 GMT
Another little problem .. if MMU is active in c64 mode .. does this mean the 8502 port fun at $00/01 behaves as it would in 128 mode ?
=)
|
|
|
Post by oziphantom on Nov 16, 2018 6:13:18 GMT
If you have a cable set up to transfer data to the other machine, then you can put a the reset pin on an out bit from the host, and just trip the reset with it. Host, trips reset wait for slave to boot its rom sends data
|
|