|
|
Post by C128Man on Aug 13, 2022 17:10:59 GMT
Instead of using LibreOffice, I decided to use Multiplan, on my good old C-128  It works great, except one little thing. I can't copy a cell with a formula. If I do that, Multiplan freeze. But it works with a string.
Do you have the same issue? Does it exist a patch? I'm using version 1.07
Ben
|
|
|
|
Post by robertb on Aug 13, 2022 18:32:58 GMT
|
|
|
|
Post by C128Man on Aug 13, 2022 19:42:04 GMT
I'm not the only one who use an old 8 bits for this king of stuff :-)
Thanks, I have the manual. In the copy section, MS only talk about cell with sting.
Is Vizastar has this kind of issue? Is it possible to find a .d71 copy? |
|
|
|
Post by robertb on Aug 14, 2022 0:28:31 GMT
Is Vizastar has this kind of issue? Is it possible to find a .d71 copy? Vizastar 128 does not have this problem. I've never looked for a .D71 of the program (because I already have it on floppy disk). However, for VZ128 to run, you must have its cartridge, too (unless you have a MegaBit Internal Rom Adaptor which runs VZ128 without the need of a cartridge). Truly, Robert Bernardo Fresno Commodore User Group - www.dickestel.com/fcug.htmSouthern California Commodore & Amiga Network - www.portcommodore.com/sccanCommodore Los Angeles Super Show - www.portcommodore.com/class |
|
|
|
Post by virtualsky on Sept 3, 2022 18:15:06 GMT
Yes, I experience the same problem when using Multiplan. I know it's not as powerful/robust as Multiplan, but I've been using Turbo Calc/128 for a while now and it's not too bad. You need to run it in 80 column mode, but it also has a version for the C64, which allows you to use your spreadsheet files on both systems. I did a review of it on my blog, if you're curious to check it out. www.my64.in.nf/doku.php?id=reviews:turbocalc |
|
|
|
Post by C128Man on Sept 7, 2022 16:30:10 GMT
Hi,
Thanks for your link, interesting blog!
|
|
|
|
Post by virtualsky on Sept 8, 2022 14:26:55 GMT
You're most welcome.... and thanks! |
|
It works great, except one little thing. I can't copy a cell with a formula. If I do that, Multiplan freeze. But it works with a string.
