|
Post by mirkosoft on Aug 25, 2017 22:07:14 GMT
Hi!
Is possible to create software switch of VIC-IIe chip PAL to NTSC and vice versa similar way like VDC - by commands:
Set to NTSC SYS DEC("CDCC"),32,4:SYS DEC("CDCC"),29,7:SYS DEC("CDCC"),126,0
Set to PAL SYS DEC("CDCC"),38,4:SYS DEC("CDCC"),32,7:SYS DEC("CDCC"),127,0 Is any way to do it?
Thank you for each reply. Miro
|
|
|
Post by Pyrofer on Aug 25, 2017 23:21:05 GMT
the VDC doesn't really have PAL/NTSC as that is to do with the colour encoding mainly which it doesn't do. You can swap the number of lines and 50/60hz etc but it's not changing PAL/NTSC as they just don't apply to the VDC.
|
|
|
Post by bjonte on Aug 26, 2017 11:09:48 GMT
Hi! Is possible to create software switch of VIC-IIe chip PAL to NTSC and vice versa similar way like VDC No, it isn't possible without hardware modifications.
|
|