|
Post by robertb on May 25, 2019 16:12:34 GMT
At the Bay Area Maker Faire 2019 last weekend, I visited the GGLABS booth, and to my surprise, I found new hardware for the C128! It was the UNICART/D.
The description of it can be found at
and I took two close-up photos of it which can be found near the bottom of
I also profusely thanked Gabriele Gorla, owner of GGLABS, for supporting the C128.
Truly, Robert Bernardo
|
|
|
Post by bjonte on May 30, 2019 8:07:07 GMT
I should add to this that if you are contributing to the retro scene, by producing hardware or software for example, you get quite a discount when buying products from GGLABS.
|
|
|
Post by Pyrofer on Aug 1, 2019 20:31:28 GMT
I got a unicart PCB from them Very nice service and a great board! I made it up and have a working C128 cart now. I can highly recommend them and this board.
|
|
|
Post by oziphantom on Aug 20, 2019 7:58:45 GMT
where you able to flash it from device?
|
|
|
Post by Pyrofer on Aug 21, 2019 7:27:51 GMT
I havent even tried. No idea if it's possible. Do you have reason to suspect it is?
|
|
|
Post by oziphantom on Aug 23, 2019 6:10:53 GMT
From the product page:
|
|
|
Post by Pyrofer on Aug 23, 2019 14:01:48 GMT
Ah. Well, unless somebody supplies the software I guess it's a no then I have a working cart and I am happy to test anything, I will message them and see if they got around to writing any software. I wonder if the easyflash guys could help?
|
|